Original Raspberry Pi 4 Model B 8GB 4GB 2GB RAM

Description

WiFi: 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless

USB: 2 USB 3.0 ports; 2 USB 2.0 ports.

SD-compatible Card: 32GB,64GB,128GB or No SD-compatible Card(optional)

RAM: 2GB/4GB/8GB LPDDR4-2400 SD-compatible RAM

Processor Brand: BROADCOM

Power Adapter: 5V 3A , USB C Port , ON/OFF Switch , EU/US/UK/AU plug

Model Number: Raspberry Pi 4 Model B

Memory Capacity: 4GB

Intergrated Feature: WiFi 802.11b/g/n

Intergrated Feature: 10/100/1000Mbps

Interface: TF Card Support

Demo Board Type: ARM

Certification: KC

Certification: RoHS

Case: ABS or Acrylic Case (optional)

CPU Model: Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz

Brand Name: Raspberry pi

Bluetooth-compatible: Bluetooth-compatible 5.0, BLE

A/V: 4-pole stereo audio and composite video port

 

 

Choose One Case

Note: Please leave a message in the order for the Case you want, otherwise we send the Case A in default. And if you choose ship from Russia, there is only Case A avalaible.

 

Case A

1. ABS material case, more stronger and durable.

2. All interfaces and ports of Raspberry Pi are reserved on the case.

3. Removable cover.

4. Support install the cooling fan on the cover, so need not worry about the heat dissipation.

Case B

1. Acrylic material , won't block the Wifi and Bluetooth-compatible signal. And it is clearly tansparent , you can watch the Raspberry Pi through the case all the time.

2. Made by 6 acrylic sheets , easy to install together ( Please be gently when installing)

3. There is a layer of protective film on the surface of acrylic , please tear up it before use , then it will be transparent.

4. It is a dual use case. You can use the case with fan on the cover , or you can use the case with GPIO type 3.5 inch LCD ( can not install fan at the same time) . The fan can provide well heat dissipation.

5. Please be gentle to install the acrylic case. We suggest you watch the installation video before install it. Be gently when assemble the case.

 

Heat Sinks:

1. Aluminum material , with good thermal conductivity.

2. With self-stick thermal conductive adhesive on the back side , easy to install on Raspberry Pi

3. 4 piece heat sink in total , for CPU , RAM , Networking card and USB control module.

Power Adapter :

1. USBC type interface for Raspberry Pi 4

2. 5V 3A out put , 100-240V 0.3A 50/60Hz input

3. EU , US , UK , AU plug available ( please write it in order page)

4. There is ON/OFF button on the cable , press ot to be ON , press it again to be OFF , very convenient to control power.

5. Power cable is about 95 cm

Micro SD-compatible Card :

1. 32GB ,64GB or 128GB capacity to choose. You can choose the no SD-compatible card option too.

2. Class 10 fast speed ,

3. Provide USB 2.0 USB reader.

4. We don't pre install system in the Micro SD-compatible card , you can install by yourself refer to :

https://projects.raspberrypi.org/en/projects/raspberry-pi-setting-up/3

HDMI-compatible Cable :

1. Micro HDMI-compatible to HDM-compatible

2. Male to male

3. 1.5m approx length

4. Use to connect the Raspberry Pi to LCD/TV/Monitor

Packing List :

1 x Raspberry Pi 4 Model B (Optional RAM 2GB,4GB or 8GB)

1 x Case (optional A or B)

1 x Cooling Fan

1 x Micro SD-compatible Card (optional 32GB,64GB,128GB or no sd-compatible card)

1 x Micro SD-compatible card Reader

4 x Heatsinks

1 x Micro HDMI-compatible Cable

1 x 5V 3A Switch Power Adapter

 

WARNINGS :

• This product should only be connected to an external power supply rated at 5V/3A DC or 5.1V/ 3A DC

minimum 1 . Any external power supply used with the Raspberry Pi 4 Model B shall comply with relevant

regulations and standards applicable in the country of intended use.

• This product should be operated in a well-ventilated environment and, if used inside a case, the case

should not be covered.

• This product should be placed on a stable, flat, non-conductive surface in use and should not be

contacted by conductive items.

• The connection of incompatible devices to the GPIO connection may affect compliance and result in

damage to the unit and invalidate the warranty.

• All peripherals used with this product should comply with relevant standards for the country of use

and be marked accordingly to ensure that safety and performance requirements are met. These

articles include but are not limited to keyboards, monitors and mice when used in conjunction with

the Raspberry Pi.

• Where peripherals are connected that do not include the cable or connector, the cable or connector

must offer adequate insulation and operation in order that the relevant performance and safety

requirements are met.